Coil
Binding Machines
Plastic Coil Binding
|
|
PC 2000 |
The PC 2000 offers a manual
punch and electric coil inserting. It features our patented Lexan
Guide for easier insertions of all coil, particularly in books over
9/16" thick. The unit will handle coil lengths from 6" to 36,
providing you with more flexibility for large jobs and calendars.
NOTE: punch patterns for the PC
2000 are limited to 4-1 & 5mm only. |
|
|
|
|
OD 4000 |
The OD 4000 provides you
with an 11" (A-4) open-ended punch with EZ Change dies and an
available wire closer and coil inserter. This machine will punch up
to 17 sheets of 20 lb. (80 gsm) bond paper and punch all standard
hole patterns. |
|
HD
6500 |
The HD-6500 is a 14 inch
(356 mm) open-ended punch that features a two bolt die system for
changing punch patterns in two minutes or less. The 6500 was
designed for the customer who may change dies less often. It also
offers quick, easy set-up: easy pin pulls and pre-set paper stop
positions.
With a full year's warranty on both
the machine and the dies this is truly the most economical heavy
duty punch available. Why consider any other punch when you can have
the best for less? Punching capacity depends on the punch pattern
being used. Rated at 25 to 40 sheets or up to 80 pages of 20 pound
bond paper (80 gsm). (15,000 - 18,000 sheets/hour).
|
|
HD
7500 |
The HD-7500 is a 24 inch
(610 mm) open-ended punch for calendar and other applications. It
features the patented "quick change" die system for changing punch
patterns in 30 seconds; no tools required and no bolts or screws to
replace or misplace.
The HD-7500 was designed with the operator in mind, offering quick,
easy set-up including easy pin pulls and pre-set paper stop
positions. The machine comes with twin motors, giving you plenty of
power for those difficult jobs. Add a full year's warranty for both
machine and the dies.
|
|
HD
7700
For More
Information & Pricing
Call Toll Free: 1-800-461-9301 |
The HD-7700 Ultima is an
exceptional Table Top Punch that has no equal. Combining the Rhin-O-Tuff
patented Quick Change Die System with the following exciting new
features: 14 " ( 356mm )
open ended extra capacity die:
Punch up to 110 pages of 11 inch, 20 pound bond paper.
U-View waste tray:
Holds up to 150% more waste than any other table top punch &
eliminates troublesome overfills.
The Accu-Set Paper Stop:
Set-up all hole placements easily & accurately, even on odd sized
paper.
Diagnostic Display Lights:
Give indications of important machine conditions.
Built in Automatic and Manual
Reverse:
Providing extra insurance to eliminate costly down time & expensive
service calls due to overload jams.
|
|
HD
7000 |
The HD-7000 is a 14 inch
(356 mm) open-ended punch that features the patented "quick change"
die system for changing punch patterns in 30 seconds; no tools
required and no bolts or screws to replace or misplace. The 7000 was
designed with the operator in mind, offering quick, easy set-up
including easy pin pulls and pre-set paper stop positions. With a
full year's warranty on both machine and the dies, this is truly the
industry standard. You need look no further for the best.
Punching capacity depends on the punch pattern being used. Rated at
25 to 40 sheets or up to 80 pages of 20 pound bond paper (80 gsm).
(15,000 - 18,000 sheets/hour). |
|
Marlon 300 |
Marlon 300
Roller Inserter
- Inserts coil 6mm through 35mm
- Plugs into back of cutter
crimper
- Built-in diameter selector
- Can operate independent of
Marlon 350 Cutter Crimper
- Continuous run motor
- Electrical
Specifications:
120 Volts
4 amps
50/60 Hz
- Shipping Weight 15 lbs.
|
|
CI 3000 |
The CI-3000 provides
electric coil inserting and features our patented Lexan Guide for
easier insertion of all coil, particularly in books 9/16" thick and
up. The unit will handle coil lengths from 6" to 36", providing you
with more flexibility for large jobs and calendars. |
For More
Information & Pricing
Call Toll Free: 1-800-461-9301 or
Request a
QUICK QUOTE
|
